Loading ...
Loading ...
Loading ...
4_ Safety information
cause an eye injury. If a leak
is detected, avoid any naked
fl ames or potential sources
of ignition and air the room
in which the appliance is
standing for several minutes.
- In order to avoid the creation
of a fl ammable gas-air mixture
if a leak in the refrigerating
circuit occurs, the size of the
room in which the appliance
may be sited depends on the
amount of refrigerant used.
- Never start up an appliance
showing any signs of damage.
If in doubt, consult your
dealer. The room where the
refrigerator will be sited must
be 1m³ in size for every 8 g
of R-600a refrigerant inside
the appliance. The amount of
refrigerant in your particular
appliance is shown on the
identifi cation plate inside the
appliance.
- If the appliance contains
isobutane refrigerant
(R-600a), a natural gas
with high environmental
compatibility that is, however,
also combustible. When
transporting and installing the
appliance, care should be
taken to ensure that no parts
of the refrigerating circuit are
damaged.
SEVERE WARNING
SIGNS FOR
INSTALLATION
• Do not install this
appliance in a humid,
oily or dusty location, in
a location exposed to
direct sunlight and
water (rain drops).
- Deteriorated insulation of
electrical parts may cause an
electric shock or fi re.
• Do not place this refrigerator
in direct sunlight or expose to
the heat from stoves, room
heaters or other appliances.
• Do not plug several
appliances into the same
multiple power board.
The refrigerator should always
be plugged into its own
individual electrical outlet
which has a voltage rating
that matched the rating plate.
- This provides the best
performance and also
prevents overloading house
wiring circuits, which could
cause a fi re hazard from
WARNING
DA99-03403B-18.indb 4DA99-03403B-18.indb 4 2017. 7. 26. 3:272017. 7. 26. 3:27
Loading ...
Loading ...
Loading ...