Loading ...
Loading ...
Loading ...
will automatically move to the starting position.
The cleaning cycle can be re-started by
pressing the ON/OFF button once.
◗ If the power plug is disconnected before the
cleaning cycle is complete, the shaver holder will
remain in its current position. Reconnect the
plug into the outlet or
Jet Clean System
and the
shaver holder will automatically move to the
highest position. The cleaning cycle can be
re-started by pressing the ON/OFF button once.
C NOTE: If the cleaning solution level drops below
the minimum level during the cleaning cycle, the
‘cleaning chamber empty’ symbol will blink and
shaver holder returns the shaver to the starting
position, stopping the cleaning cycle. Unplug Jet
Clean System from the outlet, remove shaver
and refill canister (see “Preparing Jet Clean
System for Use”).
8 When the entire cleaning cycle is complete
and the shaver is hygienically clean, the
shaver will be raised to the starting position
and the display on the shaver will turn on
indicating that the shaver is (re)charging.
9 Pull the shaver forward and lift shaver from
Jet Clean System.
◗ If the shaver needs to be recharged, you can
simply leave it in the
Jet Clean System
after
cleaning and the shaver will automatically
recharge. The display on the shaver will
indicate the shaver is recharging.
ENGLISH
C 5 Place the shaver into the holder behind
the two clips (1) and press the shaver
down to lock into place (2).
The display on the shaver will indicate shaver is
charging.
C 6 Press the ON/OFF button on the Jet
Clean System to start the cleaning cycle.
The shaver display stops showing the charging
indication.
C 7 The cleaning light starts to blink and the
shaver is automatically lowered into the
cleaning solution.
The shaver stops charging while it is being
cleaned.
◗ During the first phase of the cleaning cycle,
the shaver will automatically turn on and off
several times while the shaver holder lowers
and raises the shaver’s position in the cleaning
solution, removing all debris. The cleaning
light will blink continuously throughout the
cleaning program.
C ◗ During the second phase of the cleaning cycle,
the shaver holder moves the shaver to the
drying position and the drying light will blink.
This phase will take approximately 2 hours.
The shaver will stay in one position until the
end of the drying program.
◗ Do not press the ON/OFF button while the
cleaning cycle is running. If this does occur, the
cleaning cycle will stop and the shaver holder
30
ENGLISH
31
1
2
Loading ...
Loading ...
Loading ...