Loading ...
Loading ...
Loading ...
ENGLISH
Always remove appliance from canister by lifting
straight up. Do not tilt Jet Clean System.
C 3 Pour the Jet Clean Solution (Model HQ200)
into the canister up to a level between the
two lines located inside the canister.
NOTE: ONLY USE PHILIPS NORELCO JET
CLEAN SOLUTION (MODEL HQ200) WITH
THE JET CLEAN SYSTEM. ANY OTHER
SOLUTION MAY CAUSE DAMAGE TO YOUR
Shaver.
C ◗ When the cleaning solution level drops below
the minimum level, the ‘cleaning chamber
empty’ symbol will blink and the shaver holder
will move to the starting position.
◗ If you clean your shaver every day, you should
clean and refill the canister approximately every
15 days.
C 4 Carefully lower the appliance back onto
the Jet Clean canister making sure the
release buttons snap back into place.
When the canister is filled with cleaning solution,
do not move appliance to prevent leakage.
28
ENGLISH
Jet Cleaning the Shaver
◗ If the shaver does not contain enough power
for one (1) shave, the Jet Clean Cleaning
System may not work properly. Charge the
shaver in the
Jet Clean System
before using
the Jet Clean System to clean your shaver.
◗ If you use the shaver with shaving foam,
quickly rinse under hot water before cleaning
in the Jet Clean System.
1 Connect the small plug to the
Jet Clean
System
. Connect the charging plug into
any 100V to 240V AC outlet. Use only the
charging plug provided.
2. Place the Jet Clean System on a flat, level
surface. Fill the canister with cleaning
solution (see ‘Preparing Jet Clean System
For Use’).
C 3 Remove protective cap from shaver.
C 4 Place the shaver head side down in the
shaver holder with the display facing the
front of the Jet Clean System.
29
Loading ...
Loading ...
Loading ...