Loading ...
Loading ...
Loading ...
7
48-, 78-, 115-Can Beer and Beverage Cooler
www.insigniaproducts.com
• Place the cooler away from direct sunlight and sources of heat (stove,
heater, radiator, etc.). Direct sunlight may affect the acrylic coating and
heat sources may increase electrical consumption. Room temperature
below 50°F (10°C) or above 85°F (29.4°C) will hinder the performance.
DON’T
• Recess or build it in. This cooler is designed to be free standing only.
• Place the cooler in moist areas.
• Use the cooler in a garage or any other outside installation.
Leveling your beer and beverage cooler
• It is very important for the beer and beverage cooler to be level in order to
function properly. If the beer and beverage cooler is not leveled during
installation, the door may not close or seal properly, causing cooling, frost,
or moisture problems.
• To level your beer and beverage cooler, you may either turn the leveling
foot clockwise to raise that side to the beer and beverage cooler or turn it
counter-clockwise to lower that side.
Providing proper ventilation
• Place the beer and beverage cooler at least 1.6 inches from the wall to
ensure proper airflow to the compressor.
• Do not place the beer and beverage cooler near any heat sources, such as
a heater or stove, as this may put a strain on the compressor.
Providing a proper power supply
Check your local power source. This beer and beverage cooler requires a
110V-120V, 60 Hz power supply.
NS-BC48SS7_NS-BC84SS7_NS-BC120SS7_16-0402_MAN_V1_ENG.fm Page 7 Thursday, July 28, 2016 7:43 AM
Loading ...
Loading ...
Loading ...