Loading ...
Loading ...
Loading ...
14
NS-BC48SS7/NS-BC-BC84SS7/NS-BC120SS7
www.insigniaproducts.com
The cooler is not cold
enough
The door has been opened too
often or was not closed
properly.
Make sure that the door is closed properly.
You have just added a large
amount of warm beverage to
the cooler.
Allow time for the new beverage to cool, then check again.
The temperature control is set
too warm.
Set the control to a colder setting.
The beer and beverage
cooler makes unusual
noises or vibrates
The cooler is not level. Level the beer and beverage cooler with the leveling feet.
The body of the beer and
beverage cooler is touching a
wall.
Move the beer and beverage cooler out from the wall.
A rattling noise may be
heard. This is caused by the
flow of refrigerent in the
beer and beverage cooler.
As each cooling cycle ends,
you may hear gurgling
sounds.
Contraction and expansion
of the inside walls may
cause popping or crackling
noises.
This is normal.
Moisture is building up
in the interior of the
cooler
The door has been opened too
often or was not closed
properly.
Make sure that the door is closed properly.
The cooler is in a location that
is very humid.
Move the cooler to a dryer location.
The cooler turns on and
off frequently
The room temperature is
hotter than normal.
Cool the room or move your beer and beverage cooler to a
cooler place.
The door has been opened too
often or was not closed
properly.
Make sure that the door is closed properly.
The door gaskets do not seal
properly.
Clean the door gaskets.
The temperature control is set
too warm.
Set the control to a colder setting.
The humidity level in
your cooler is too low
The door has been opened too
often or was not closed
properly.
Make sure that the door is closed properly.
The cooler is in a location that
is too hot.
Move the cooler to a cooler location.
Relative humidity is too low. Place a cup of water inside the cooler to raise the humidity.
Problem Possible cause Possible solution
NS-BC48SS7_NS-BC84SS7_NS-BC120SS7_16-0402_MAN_V1_ENG.fm Page 14 Thursday, July 28, 2016 7:43 AM
Loading ...
Loading ...
Loading ...