Loading ...
Loading ...
Loading ...
13
48-, 78-, 115-Can Beer and Beverage Cooler
www.insigniaproducts.com
4 Tape the door shut.
Be sure the beer and beverage cooler stays in the upright position
during transportation.
Tips on saving energy
• Place your cooler in the coolest area of the room, away from heat
producing appliances or heating ducts and out of the direct sunlight.
• Do not overload the cooler because it forces the compressor to run longer.
• Do not open the door too often, especially if the weather is very hot. Close
the door as soon as possible to prevent cool air from escaping.
• Make sure that the cooler is sufficiently ventilated with adequate air
circulation.
Troubleshooting
Fault indication
If a fault is detected, the display shows one of the following codes:
Caution
Do not try to repair your beer and beverage cooler yourself.
Doing so invalidates the warranty.
Fault code E1 E2
Description Temperature sensor fault Defroster sensor fault
Note
When the above faults are displayed, do not attempt to repair
the cooler by yourself. Please contact customer service for help.
Problem Possible cause Possible solution
The beer and beverage
cooler does not operate
The beer and beverage cooler
is unplugged.
Make sure that the beer and beverage cooler is plugged in and
that the plug is pushed completely into the outlet.
The fuse on the circuit is blown
or the circuit breaker is
tripped.
Check the house fuse/circuit breaker box and replace the fuse or
reset the circuit breaker.
Power failure. If a power failure occurs, the beer and beverage cooler turns off.
Wait until the power is restored, then turn it on again.
The cooler door does
not close completely
The shelf is out of position. Adjust the shelf properly.
The door gaskets are dirty. Clean the door gaskets.
The cooler is not level. Level the cooler with the leveling feet.
NS-BC48SS7_NS-BC84SS7_NS-BC120SS7_16-0402_MAN_V1_ENG.fm Page 13 Thursday, July 28, 2016 7:43 AM
Loading ...
Loading ...
Loading ...