Loading ...
Loading ...
Loading ...
49-80713 Rev. 2
The oven door must be closed and all controls set correctly for the cycle to work properly.
Before a Clean Cycle
For the first self-clean cycle, we recommend venting your
kitchen with an open window or using a ventilation fan or
hood.
Remove racks, any broiler pan, broiler grid, all cookware
and any aluminum foil from the oven.
7KHVKLQ\VLOYHUFRORUHGRYHQUDFNVRQVRPHPRGHOV
can be self-cleaned, but they will darken, lose their luster
and become hard to slide.
Soil on the front frame of the oven and outside the gasket
on the door will need to be cleaned by hand. Clean
these areas with hot water, soap-filled scrubbing pads
or cleansers such as Soft Scrub®. Rinse well with clean
water and dry.
Do not clean the gasket. The fiberglass material of
the oven door gasket cannot withstand abrasion. It is
essential for the gasket to remain intact. If you notice it
becoming worn or frayed, replace it.
Wipe up any heavy spillovers on the oven bottom.
Make sure the oven light bulb cover is in place and the
oven light is off.
IMPORTANT: The health of some birds is extremely
sensitive to the fumes given off during the self-cleaning
cycle of any oven. Move birds to another well-ventilated
room.
How to Set the Oven for Cleaning
7RXFKWKHSELF CLEAN pad.
2. Touch the + or – pad to enter the desired clean time,
if a time other than 4 hours is needed.
Clean cycle time is normally 4 hours. You can change
the clean time to any time between 3 hours and 5 hours,
depending on how dirty your oven is.
3. Touch the START pad.
The door locks automatically. The display will show the
clean time remaining. It will not be possible to open the
oven door until the temperature drops below the lock
temperature and the LOCKED DOOR light goes off.
When the LOCKED DOOR light is off, open the door.
The oven shuts off automatically when the clean cycle is
complete.
NOTES:
Ŷ7KHZRUGVLOCK DOOR will flash and the oven
control will signal if you set the clean cycle and forget
to close the oven door.
Ŷ7RVWRSDFOHDQF\FOHWRXFKWKHCLEAR OFF pad.
When the LOCKED DOOR light goes off indicating the
oven has cooled below the locking temperature, open
the door.
How to Delay the Start of Cleaning
Delay Start is setting the oven to start the clean cycle
automatically at a later time than the present time of day.
NOTE: %HIRUHEHJLQQLQJPDNHVXUHWKHRYHQFORFN
shows the correct time of day.
7RXFKWKHSELF CLEAN pad.
2. Touch the + or – pad to enter the desired clean time.
3. Touch the DELAY START pad. The earliest start time
you can set will appear in the display.
4. Touch the + or – pad to enter the time of day you
want the clean cycle to start.
5. Touch the START pad.
The door locks automatically. The display will show the
start time. It will not be possible to open the oven door
until the temperature drops below the lock temperature
and the LOCKED DOOR light goes off.
When the LOCKED DOOR light is off, open the door.
NOTE:
Ŷ<RXFDQILQGRXWZKHQWKHFOHDQF\FOHZLOOVWDUWE\
touching the DELAY START pad.
CARE AND CLEANING: Self-Cleaning
Self-Cleaning
Wipe up heavy soil on the oven
bottom.
Loading ...
Loading ...
Loading ...