Loading ...
Loading ...
Loading ...
WARNING
BEFORE CLEANING: Turn the refrigerator off at the power
point and unplug the cord to prevent any chance of
electrocuting yourself.
You should only clean the doors with lukewarm soapy
water and a soft cloth.
Your stainless steel refrigerator is manufactured from
mark-resistant stainless steel. This stainless steel has
a special advanced protective coating that eases
the removal of marks such as fingerprints and water
spots. To keep its appearance, clean it regularly with
lukewarm soapy water and a soft cloth.
CAUTION
Never use stainless steel cleaners, abrasive pads or other
cleaners that will scratch the surface. Damage to the
appliance after delivery is not covered by your warranty.
Clean the inside of your refrigerator regularly with a
soft cloth, unscented mild soap and lukewarm water.
Thoroughly dry all surfaces and removable parts and
avoid getting water on the controls. Replace removable
parts, plug power cord in and switch the power on
before returning the food.
Always keep door seals clean by washing them with a
mild detergent and warm water, followed by a thorough
drying. Sticky food and drink can cause seals to stick to
the cabinet and tear when you open the door.
CAUTION
Never use hot water, solvents, commercial kitchen cleaners,
aerosol cleaners, metal polishes, caustic or abrasive cleaners,
or scourers to clean your refrigerator. Many commercially
available cleaning products and detergents contain solvents
that will damage your refrigerator. Use only a soft cloth with an
unscented mild soap and lukewarm water.
If your refrigerator has telescopic extension slides, simply
wipe them with a damp cloth to clean them and never
immerse them in water.
This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning
use of the appliance by a person responsible for their
safety. Children should be supervised to ensure that they do
not play with the appliance.
Check the power point is properly earthed – if you are not
sure get an electrician to check it.
Switch off and unplug the refrigerator at the power point
before you clean or move it.
If the power supply cord is damaged, have it replaced by
the manufacturer, service agent or similarly qualified person.
Never let children play with the refrigerator.
Never store spray cans, explosive fluids or flammable liquids in
the refrigerator.
Never store fizzy drinks in the freezer compartment.
Never lick icy foods when they first come out of the freezer.
This can burn your your lips and mouth.
Never try to repair the refrigerator yourself.
Never use electric heaters or dryers to defrost the freezer
because you can receive an electric shock.
Never use electrical appliances inside the food storage areas.
This appliance contains insulation formed with flammable
blowing gases. For safety reasons, take care when you
dispose of it.
Do not damage the appliance circuit.
WARNING
When you dispose of your old refrigerator or freezer, remove
any doors to prevent children from being trapped inside.
WARNING
This appliance may contain a small quantity of environmentally
friendly, but flammable, non-synthetic R600a refrigerant:
• Ensure that the tubing of the refrigerant circuit is not
damaged during transportation and installation.
• The room for installing appliance must be at least 1m3 per
8g of refrigerant. The amount of refrigerant charged in the
appliance can be found on the rating plate on the appliance.
• Keep ventilation openings in the appliance enclosure or
in the built-in structure, clear of obstruction.
• Do not use mechanical devices or other means to
accelerate the defrosting process, other than those
recommended by the manufacturer.
• The room for installing appliance must be at least 1m
3
per 8g of refrigerant. The amount of refrigerant charged
in the appliance can be found on the rating plate on
the appliance.
If you switch your refrigerator for an extended
period, follow these steps to reduce the chances of mould:
1. Remove all food.
2. Remove the power plug from the power point.
3. Thoroughly clean and dry the Interior.
4. Ensure that all the doors are wedged open slightly for
air circulation.
Loading ...
Loading ...
Loading ...