Loading ...
Loading ...
Loading ...
English - 29
Display Contrast Settings
To set the display contrast on the Model One Digital press and hold the power button and MOD
bezel at the same time while the unit is on. “Contrast” should appear on the screen with a number
informing you of the level the contrast is set at. Turn the MOD bezel to adjust to preferred contrast
level. Allow the screen to time out by not pressing anything and the Model One Digital will save this
setting.
Care
A dry cloth is recommended to clean the back and wooden cabinet of your Model One Digital.
A lint roller can be used to clean the fabric on the front. Do not expose to water.
Troubleshooting and FAQs
Troubleshooting
1. The display says Connect Radio to WiFi. Your speaker is having trouble connecting to a network
it was previously set up for. Check to make sure the network is still active. If the network is still
active, try turning off the speaker and turning it back on. If that does not work, perform a factory
reset (hold down the Setup and Party Mode buttons for 3 seconds) and repeat the setup process
for the speaker.
2. The display says Wireless Setup Enabled. Your speaker has not been set up for a wireless net-
work and it is in setup mode. Refer to the setup directions in either the Quick Setup Guide or the
Online Manual.
3. The display says Pairing Enabled. Your speaker is in Bluetooth pairing mode. Refer to the Blue-
tooth pairing directions in either the Quick Setup Guide or the Online Manual.
4. I can’t find my Wireless Network (WiFi) listed in the Tivoli App. Make sure your Wireless Ac-
cess Point or Wireless Router is powered on and connected to the internet. Verify that your WiFi
band is set to the standard 2.4GHz. The ART system does not support 5GHz. Make sure your
device is connected to your Wireless Network. Close the Tivoli Audio App and then re-open the
App. You should be able to see the Wireless Network now.
5. The music sounds unbalanced through my speaker. To check balance, open the Tivoli App,
select Zone and select Speakers. Select the speaker(s) you are using. If you are using only one
speaker, verify that the speaker is set to Stereo. If you are using two speakers, confirm the volume
levels are the same and that they are both set to Stereo or Left/Right if you are listening to them
as a stereo pair. If you are using more than two speakers, make sure all Left and Right speakers are
set up in pairs (for example, do not have 2 Lefts and 1 Right).
6. I have set up the speakers, but I can’t find the Model One Digital listed in the App. Make
sure the LED in the back of the speaker is a solid green color. Power off the unit by holding down
the power button on the back of the unit until the LED turns red, then press the power button
Clock Set
Loading ...
Loading ...
Loading ...