Loading ...
Loading ...
Loading ...
54
Reference
Controlling a TV with the Supplied Remote Control
You can control the volume, input source, and power state of your
LG/GoldStar TV with the supplied Remote Control.
You can control your TV using the buttons below.
By pressing You can
TV POWER Turn the TV on or off.
INPUT Switch the TV’s input source between the
TV and other input sources.
PR/CH
vv
/
VV
Scan up or down through memorized
channels.
VOL +/– Adjust the volume of the TV.
Setting up the remote to control your TV
You can operate your LG/GoldStar TV with the supplied remote control.
While holding down TV POWER button, press PR/CH
vv
or
VV
.
Release the TV POWER button to complete setting.
When you replace the batteries of the remote, you may have reset the
remote control.
POWER
TV Control
Buttons
Resetting the unit
If you observe any of the following symptoms.
• The unit is plugged in, but the power will not turn on or off.
• The front panel display is not working.
• The unit is not operating normally.
You can reset the unit as follows.
• Press and hold the POWER button for at least five seconds. This will
force the unit to power off then turn the unit back on.
• Unplug the power cord, wait at least five seconds, and then plug it in
again.
HLB54S-DP_BGRCLLK_ENG_4227 3/16/10 7:13 PM Page 54
Loading ...
Loading ...
Loading ...