Loading ...
Loading ...
Loading ...
NOTE:
∙ Odors from inside and outside the ve-
hicle can build up in the air conditioner
unit. Odor can enter the passenger
compartment through the vents.
∙ When parking, set the heater and air
conditioner controls to turn off air recir-
culation to allow fresh air into the pas-
senger compartment. This should help
reduce odors inside the vehicle.
AUTOMATIC OPERATION
Cooling and/or dehumidified
heating (AUTO)
This mode may be used all year round as
the system automatically works to keep a
constant temperature. Air flow distribution
and fan speed are also controlled auto-
matically.
1. Press the AUTO button on. (The indica-
tor on the button will illuminate and
AUTO will be displayed.)
2. Use the temperature control buttons
to set the desired temperature.
∙ Adjust the temperature display to
about 75°F (24°C) for normal operation.
∙ The temperature of the passenger
compartment will be maintained auto-
matically. Air flow distribution and fan
speed are also controlled automatically.
∙ A visible mist may be seen coming from
the vents in hot, humid conditions as
the air is cooled rapidly. This does not
indicate a malfunction.
3. You can individually set driver’s and
front passenger’s side temperature us-
ing each set of temperature control
buttons. When the DUAL button or pas-
senger’s side temperature control but-
tons are pressed, the DUAL indicator
will come on. To turn off the passen-
ger’s side temperature control, press
the DUAL button.
Heating (A/C OFF)
The air conditioner does not activate. When
you need to heat only, use this mode.
1. Press the
button (A/C indicator
will turn off).
2. Use the temperature control buttons
to set the desired temperature.
∙ The temperature of the passenger
compartment will be maintained auto-
matically. Air flow distribution and fan
speed are also controlled automatically.
∙ Do not set the temperature lower than
the outside air temperature or the sys-
tem may not work properly.
∙ Not recommended if windows fog up.
Dehumidified defrosting or
defogging
1. Press the
front defroster button.
2. Use the temperature control buttons
to set the desired temperature.
∙ To quickly remove ice from the outside
of the windows, use the fan speed con-
trol dial to set the fan speed to maxi-
mum.
∙ As soon as possible after the wind-
shield is clean, press the AUTO button to
return to the automatic mode.
4-32 Monitor, climate, audio, phone and voice recognition systems
Loading ...
Loading ...
Loading ...