Loading ...
Loading ...
Loading ...
9
Interior Lighting Control
The interior lighting comes on automatically
when the door is opened.
SHOWCASE Mode Lighting
To enable the SHOWCASE mode, open the
door, press and release the smaller gray switch
next to the large gray switch located at the
bottom left side of the cabinet front. After clos-
ing the door, the interior lights will remain on.
To disable the SHOWCASE mode anytime
before the 2 hours expires, open the door,
press and release the smaller gray switch,
and close the door. After closing the door, the
interior lights will turn off.
LED Lighting
To Replace LED Lights:
1. Unplug the power cord.
2. Remove light cover by pushing up and out.
3. Hold the LED cover with one hand and pull
the connector with the other hand while
pressing the connector latch.
4. Replace LED light and snap in place
assuring the light is facing in toward the
unit (inside fresh food).
LED Light
Removal
LED Light
Harness Removal
NOTE
LED lights are in series, so if one is bad or
unplugged, several lights may not light up.
INTERIOR LIGHTING
The interior lights can be placed in a SHOW-
CASE mode. In this mode the interior lights
remain on for approximately 2 hours after the
door is closed.
Light Switch
(Door) Open/Close
SHOWCASE Mode Switch
Approx. (2 Hours)
Loading ...
Loading ...
Loading ...