Loading ...
Loading ...
Loading ...
10
Setting the PRO-SELECT™ Electronic Control
Cool Down Period
For safe food storage, allow 4 hours for refrigerator to cool down completely. The refrigerator
will run continuously for the rst several hours.
Pro-Select™ Electronic Control
The Pro-Select™ Electronic Control is located inside the refrigerator. Temperature is factory
preset to provide satisfactory food storage temperatures. After 24 hours, gradually adjust the
temperature in small increments, allowing the temperature to stabilize. However, the temperature
control is adjustable to provide a range of temperatures for your personal satisfaction.
°F
PRO-SELECT™ Electronic Control Features
Replace Air Filter
When the “REPLACE AIR FILTER” LED is illuminated yellow, the air lter needs to be replaced.
The control will signal for air lter replacement after 3600 hours of refrigerator operation. After
replacing the air lter, reset the air lter timer by pressing the AIR FILTER key for 3 seconds. The
“REPLACE AIR FILTER” LED will be illuminated green for 3 seconds, conrming a timer reset.
°F
CONTROLS
To adjust the temperature setting, press the UP () key for warmer temperature and DOWN
() key for colder temperature on the control panel. Allow several hours for the temperature to
stabilize between adjustments. The refrigerator can be adjusted between 33°F (1°C) and 46°F
(8°C). By pressing the TEMP MODE key, the temperature display will toggle between °F and °C.
To turn the refrigerator OFF, press the UP () key until the warmest temperature setting of
46°F (8°C) shows in the display. Then press the UP () key 3 times within 3 seconds to turn
the refrigerator OFF. The display will then show “OF”. To turn the unit back ON, press the
DOWN () key 3 times within 3 seconds. The control will then display “46°F (8°C)” and may be
adjusted to the desired temperature.
°F
Control Lock
To disable the keypads on the control, begin by pressing the CONTROL LOCK key for 3 seconds
until “LO” is displayed for 1 second. With the control locked, when keys are pressed on the
control panel, “LO” will be displayed. To unlock the control, press the CONTROL LOCK key for 3
seconds. The display will show “UL” for one second.
Loading ...
Loading ...
Loading ...