Loading ...
Loading ...
Loading ...
5
PLACEMENT AND INSTALLATION
Choosing the Right Place
To ensure that your wine dispenser works at the maximum efficiency it was designed for,
install it in a location where there are proper air circulation and electrical connections.
Choose a location where the wine dispenser will be away from any heat sources and will
not be exposed to direct sunlight.
Remove all packing materials before using the wine dispenser.
Place the machine on a smooth, flat and sturdy surface.
Installation
Your appliance is not designed to operate in enclosed spaces. When placing your unit,
make sure you allow at least 4” of clearance at the sides, rear and top to allow for
adequate airflow.
Applications
The SBC635MWKD wine keg dispenser meets UL Standard 250 and is suitable for
residential use.
Connecting to Power Supply
Connect this appliance to a 3-prong power supply socket (which has a ground terminal).
If you only have a two-prong outlet, have it replaced by a qualified technician with an
outlet that meets the local codes.
DO NOT USE AN EXTENSION CORD
Required nominal voltage and frequency are indicated on the rating plate. The
connection to the power supply and grounding has to be made according to current
standards and regulations. The appliance resists temporary voltage fluctuations with a
tolerance of 10%.
Once connected, allow the appliance to operate empty for two to three hours before
putting a wine keg inside.
Loading ...
Loading ...
Loading ...