Loading ...
Loading ...
Loading ...
X What to do when
Problem Solution
The display
remains
blank after
you have
turned on
the P-touch
labeling
system.
• Check that the batteries are
correctly installed. Refer to the
Installing Power Supply and
Tape Cassette section.
• The batteries may be weak.
Replace them.
• Check that the AD24 Adapter is
correctly connected.
When the
label is
printed,
there is too
much
margin
(space) on
both sides
of the text.
• Refer to the Setting Margins
section in this guide and select
[Half] , [Narrow] or [Chain
Print] to have smaller margins for
your tape.
The P-touch
labeling
system
does not
print, or the
printed
characters
are not
formed
properly.
• Check that the cassette is inserted
correctly.
• If the cassette is empty, replace it.
• Check that the Tape Cassette
Cover is closed correctly.
The setting
has cleared
on its own.
• The batteries may be weak.
Replace them.
• When power is disconnected for
more than three minutes, all text
and formats in the display settings
are cleared.
A blank
horizontal
line appears
through the
printed
tape.
• There may be some dust on the
Print Head. Remove the cassette
and use a dry cotton swab to gently
wipe the Print Head with an up-and-
down motion. Refer to the
Installing Power Supply and
Tape Cassette section in this guide
for the Print Head location.
Problem Solution
The P-touch
labeling
system has
“locked up”
(i.e., nothing
happens
when a key
is pressed,
even though
the P-touch
labeling
system is
on.)
• Refer to the Resetting the P-touch
Labeling System section in this
guide.
The power
turns off
when you
try to print.
• The batteries may be weak.
Replace them.
• Check that the batteries are
correctly inserted.
• The wrong AC Adapter is used. We
recommend using the AD24
Adapter.
The tape
does not
feed
properly or
the tape
gets stuck
inside the
P-touch
labeling
system.
• Check that the end of the tape
feeds under the tape guides. Refer
to the Installing Power Supply
and Tape Cassette section in this
guide for an example.
• The Cutter Lever is pressed while
printing. Do not touch the Cutter
Lever during printing.
To change
language
setting.
• Refer to the Initial Settings section
in this guide.