Loading ...
Loading ...
Loading ...
9
TEMPERATURE DISPLAY (FAHRENHEIT
OR CELSIUS)
The Broil and Self Clean keys control the Fahrenheit
(°F) or Celsius (°C) temperature display modes. The oven
control can be programmed to display temperatures in °F
or °C. The oven is preset at the factory to display in °F.
To change display from °F to °C or °C to °F
1. To tell if the display is set for °F or °C, press Broil
and hold for 6 seconds. 550° will appear, Broil
will flash in the display, and a beep will sound. If
F appears, the display is set to show temperatures
in °F. If C appears, the display is set to show
temperatures in °C.
2. Press Self Clean to switch between °F or °C display
modes. The display will show either F or C.
3. Press Start to accept the change or press off to
reject the change.
SETTING CONTROL FOR SILENT
OPERATION
Delay Start and Self Clean pads control the silent
control operation feature. The silent control operation
feature allows the oven control to be operated without
sounds or beeps whenever necessary. If desired the
control can be programmed for silent operation and later
returned to operating with all the normal sounds and
beeps.
To change control from normal sound operation to
silent control operation
1. To set oven for normal or silent operation, press and
hold Delay Start. "-- --" will appear and Delay will
ash in the display. After 6 seconds bEEP On or
bEEP OFF will appear in the display.
2. Press Self Clean to switch between normal sound
operation and silent operation mode. The display will
show either bEEP On or bEEP OFF. if bEEP On
appears, the control will operate with normal sounds
and beeps. If bEEP OFF appears, the control is in
the silent operation mode.
3. Press Start to accept the change or press Off to
reject the change.
SETTING THE CLOCK
The Set Clock pad is used to set the clock. The clock
may be set for 12 or 24 hours display operation. The
clock is preset at the factory for the 12 hour display.
When the oven is rst plugged in, or when the power
supply to the oven has been interrupted, the timer in the
display will ash.
To set the clock (example below for 1:30)
1. Press Set Clock. CLO will appear in the display.
2. Press 1 3 0 on the keypad to set the time of day to
1:30. CLO will stay in the display.
3. Press Start. CLO will disappear and the clock will
start.
SETTING 12 OR 24 HOUR TIME OF DAY
DISPLAY
1. Press and hold the Set Clock pad for 6 seconds.
CLO will appear in the display.
2. Continue holding the key until 12Hr dAY or 24Hr
dAY appears in the display and the control beeps
once.
3. Press Self Clean to switch between the 12 and 24
hour time of day display. The display will show either
12Hr dAY or 24Hr dAY.
4. Press Start to accept the change or press Off to
reject the change.
5. Reset the correct time as described in this section. If
the 24 hour time of day mode was chosen, the clock
will display time from 0:00 through 23:59 hours.
SETTING CONTINUOUS BAKE OR 6 HOUR
ENERGY SAVING
The Timer on-off and Self-Clean keys control the
continuous bake or 6 hour energy saving features. The
oven control has a factory preset 6 hour energy saving
feature that shuts off the oven if the oven control is left
on for more than 6 hours. The oven can be programmed
to override this feature for Continuous Baking.
To set the control for continuous bake or 6 hour
energy saving:
1. Press and hold Timer on-off for 6 seconds. After
6 seconds 6Hr OFF or StAY On will appear in the
display and the control will beep once.
2. Press Self-Clean to switch between the 6 hour
energy saving and continuous bake features.
3. Press Start to accept the change (display will return
to time of day) or press Off to reject the change.
6Hr OFF indicates the control is set for the 6 hour energy
saving mode. StAY On indicates the control is set for the
continuous bake feature.
NOTE
The control will always beep at the end of a minute timer
and will beep when a set temperature has been reached,
even if the control is set to silent operation.
SETTING OVEN CONTROLS
Loading ...
Loading ...
Loading ...