Loading ...
Loading ...
Loading ...
21
SETTING OVEN CONTROLS
STEAM CLEAN
The steam clean feature offers a chemical-free and
time-saving method to assist in the routine cleaning of
your oven. Steam clean may be used before manually
cleaning the oven to help loosen soils on the oven
bottom.
CAUTION
Do not add ammonia, oven cleaners, or any other
household cleaners or chemicals to the water used in
the steam clean cycle.
Before manually cleaning any part of the oven, be sure
all controls are turned off and the oven is cool. The
oven may be hot and can cause burns.
To set a steam clean cycle:
1. Oven should be at room temperature. If the oven
temperature is above the room temperature, steam
clean will not start. Be sure the oven is cool. Remove
all racks and oven accessories.
2. Scrape or wipe loose debris from the oven bottom.
3. Pour 8 oz (235 ml) distilled or ltered water onto the
oven bottom (see gure 1). Close the oven door.
For best results, clean oven immediately after the cycle
is complete. Steam clean works best for soils on the
oven bottom. Removal of especially stubborn or baked-
on soils may require a manual cleaning. See instructions
in the "Cleaning various parts of your wall oven" section.
Some condensation or water vapor may appear close
to the oven vent. This is normal. The oven gasket may
become damp; do not wipe dry. Open door and allow to
air dry.
Local water sources often contain minerals (hard water)
and will leave deposits on the oven cavity. If this occurs,
wipe cavity with vinegar or lemon juice. Use distilled or
ltered water.
If the door is opened during the steam clean cycle, a
beep will sound and d-0 will show in the display. Close
the oven door. Keep oven door closed during steam
clean cycle.
Steam clean cannot be programmed with a delay start. If
steam clean results are not satisfactory, run a self clean.
4. Press Steam Clean. StCn will show in the display
(see gure 2).
5. Press Start.
6. Steam clean is a 20 minute cycle. Time remaining is
shown in the display.
7. An alert will sound at the end of the cycle, and the
End message will show in the display. Press Off to
return to the clock.
8. When steam clean cycle is complete, stand to the
side of the oven out of the way of escaping vapor
when opening the oven door. The cycle includes a
cool-down period, so you may immediately use a soft
cloth or sponge to remove any remaining water.
9. Wipe oven cavity and bottom. Do not clean oven
door gasket.
Figure 1: Add 8 ounces of distilled water.
Figure 2: Steam clean selected
Figure 3: Clean around
the oven door gasket.
Loading ...
Loading ...
Loading ...