Loading ...
Loading ...
Loading ...
112
Note: Available settings depend on the current input source. The lamp usage timer does not register any
hours until you have used the lamp for at least 10 hours.
Projector Info information
Information item Description
Lamp Hours Displays the number of hours (H) the lamp has been used
Source Displays the name of the port to which the current input source is
connected
Input Signal Displays the input signal setting of the current input source
Resolution Displays the resolution of the current input source
Scan Mode Displays the scan mode of the current input source
Refresh Rate Displays the refresh rate of the current input source
3D Format Displays the format of the 3D signal
Sync Info Displays information that may be needed by a service technician
Color Depth Displays the color depth and color difference
Color Format Displays information about the color space and dynamic range
Status Displays information about projector problems that may be needed
by a service technician
Serial Number Displays the projector's serial number
Event ID Displays the Event ID number corresponding to a specific projector
problem; see the list of Event ID codes
Event ID Code List
Parent topic: Adjusting the Menu Settings
Related tasks
Replacing the Lamp
Resetting the Lamp Timer
Event ID Code List
If the Event ID option on the Info menu displays a code number, check this list of Event ID codes for the
solution to the projector problem associated with the code.
Loading ...
Loading ...
Loading ...