Loading ...
Loading ...
Loading ...
PSR-E363, PSR-EW300, YPT-360 Owner’s Manual
30
Reference
Playing an External Audio Device with the Built-in Speakers
You can output the sound of an external audio device, such as a portable music player,
with the built-in speakers of this instrument by connecting it via a cable. This lets you
play the keyboard along with playback of your music player.
1
Turn off the power for both the external
audio device and this instrument.
2
Connect the audio device to the instru-
ment’s [AUX IN] jack.
Use the cable which has the stereo-mini plug at
one side for connecting to this instrument and the
plug matching the output jack of the external
audio device at the other side.
3
Turn on the external audio device, then
this instrument.
4
Play back the connected external audio
device.
The sound of the audio device is output through
the speakers of this instrument.
5
Adjust the volume balance between the
external audio device and this instrument.
Adjust the audio playback volume on the audio
device, then adjust the entire volume by rotating
the [MASTER VOLUME] control of the instru-
ment.
6
Play the keyboard along with the sound
of the audio device.
You can cancel or lower the volume of the melody
part of audio playback. For details, refer to page
31.
7
After finishing the performance, stop
playback of the audio device.
• Before connecting, turn off the power of both this instrument and the external audio device. Also, before turning the power on or
off, make sure to set all volume levels to minimum (0). Otherwise, damage to the devices, electrical shock, or even permanent
hearing loss may occur.
CAUTION
• To avoid damage to the devices, first turn on the power to
the external device, and then to the instrument. When turn-
ing off the power, first turn off the power to the instrument,
and then to the external device.
• If you are using a computer or a smart device such as an
iPhone/iPad, you can also connect it to the [USB TO
HOST] terminal (see “Connecting to a Computer” on
page 48).
NOTICE
Audio device (Portable
audio player, etc.)
Stereo-mini
plug
NOTE
• You can adjust the level of the input from the external
audio device by calling up “AuxInVol” via Function num-
ber 003 (page 45) and using the [0]–[9], [+], [-] buttons.
NOTE
Loading ...
Loading ...
Loading ...