Loading ...
Loading ...
Loading ...
82 Instruments and controls
If C illuminates (possibly in
combination with W and/or R), stop
vehicle and switch off engine as soon
as possible.
9 Warning
Have the cause of the fault
remedied immediately by a
workshop.
Depending on the type of fault, a
warning message may also appear in
the Driver Information Centre 3 85.
Brake system
R illuminates red.
Illuminates briefly when the ignition is
switched on.
Control indicator R remains
illuminated after the ignition is
switched on if the parking brake is
applied 3 123.
When the parking brake is released,
R illuminates (possibly in
combination with C) if the brake fluid
level is too low 3 145.
9
Warning
Stop. Do not continue your
journey. Consult a workshop.
Brake system 3 122.
Antilock brake system
(ABS)
u illuminates yellow.
Illuminates briefly when the ignition is
switched on. The system is ready for
operation when u extinguishes.
If control indicators u and A
illuminate with the messages CHECK
ABS and CHECK ESP in the Driver
Information Centre 3 85, there is a
fault in the ABS. The brake system
remains operational but without ABS
regulation.
If control indicators u, A, R and
C illuminate, the ABS and ESP are
deactivated and the message
BRAKING FAULT is displayed. Seek
the assistance of a workshop.
Antilock brake system 3 122.
Upshift
k or j illuminates yellow.
Illuminates when gearshifting is
recommended for fuel saving
reasons.
ECO mode 3 109.
Electronic Stability
Program
b flashes or illuminates yellow.
Illuminates for a few seconds when
the ignition is switched on.
Flashing during driving
The system is actively engaged.
Engine output may be reduced and
the vehicle may be braked
automatically to a small degree
3 126.
Illuminates during driving
The system is unavailable.
May illuminate together with control
indicator A 3 81. A corresponding
message also appears in the Driver
Information Centre 3 85.
Loading ...
Loading ...
Loading ...