Loading ...
Loading ...
Loading ...
152 Vehicle care
Tail lights
Rear brake, tail, turn signal,
reverse and fog tail lights
1. Remove the upper and lower trim
panels from the rear pillar.
2. Unscrew the two nuts from the
locating pins on the rear of the
lamp assembly.
3. Withdraw the lamp assembly
rearwards from the outer side.
4. Detach wiring connector from
lamp assembly.
5. Remove the three screws from
the rear of the lamp assembly.
6. Remove bulb holder from the
lamp assembly.
7. Push bulb into socket slightly,
rotate anti-clockwise, remove and
renew bulb.
Turn signal light (1)
Tail and brake light (2)
Reverse light (3)
Rear fog light, may be on one side
only (4)
8. Replace bulb holder in lamp
assembly.
9. Replace the three screws on the
rear of the lamp assembly.
10. Reattach wiring connector to lamp
assembly.
11. Replace lamp assembly from the
outer side into original position,
ensuring that it is seated correctly.
12. Replace the two nuts onto the
locating pins on the rear of the
lamp assembly.
13. Install the upper and lower trim
panels to the rear pillar.
Loading ...
Loading ...
Loading ...