Loading ...
Loading ...
Loading ...
▷ D/S: switch between drive mode and sequen‐
tial mode.
Engaging a selector lever position
Press on the brake pedal and pull or push the se‐
lector lever in the corresponding direction.
As soon as the selector lever is released, it re‐
verts to the center position. In position R, the se‐
lector lever locks.
The engaged selector lever position is displayed
in the instrument cluster and on the selector
lever.
If a selector lever position is engaged, the vehicle
may start rolling, after the brake is released, for
instance on downhill slopes. Thus, drive off im‐
mediately after releasing the brake.
Use the Slow Speed Assistant for maneuvering
and during stop-and-go traffic.
Low Speed Assistant
Concept
The Low Speed Assistant gives assistance at
very low speeds. The vehicle moves at walking
speed.
This can also be used for rocking the vehicle in
the snow. To do this, switch between reverse
gear and forward gear without stepping on the
brakes in the process.
Safety information
NOTICE
When using the function and simultaneously
stepping on the brake pedal for a longer time,
the transmission can overheat. There is a risk of
damage to property. When using the function,
do not brake for a longer period.
Activating
1.
Engage a driving position.
2. Briefly tap the accelerator pedal.
In 1st and 2nd gear and in reverse, the vehicle
rolls at minimum speed.
Deactivating
Apply the brakes until the vehicle comes to a
stop.
Flashing display on the selector
lever of the double clutch
transmission
The actually engaged transmission position can
deviate from the selector lever position in some
situations. The display in the selector lever
flashes.
Observe the display in the instrument cluster in
these cases.
D is Drive mode
In Drive mode, all forward gears are automatically
changed.
Kickdown: for maximum acceleration, for in‐
stance when passing. To do this, depress the ac‐
celerator pedal past the resistance point.
Switch to Sequential mode: shift using the shift
paddles or the selector lever, or push the selec‐
tor lever in the D/S direction.
S is Sequential mode
Use the shift paddles or the selector lever to up‐
shift or downshift without letting off the gas.
▷ Shortly before falling below a gear-dependent
minimum speed, the transmission is automat‐
ically downshifted.
▷ Upshifting or downshifting is done only if the
rpm and vehicle speed are appropriate.
E.g., there is no downshifting if the engine
speed is too high.
▷ Kickdown: the lowest possible gear is se‐
lected by simultaneously operating the kick‐
down and the left shift paddle or selector
lever.
▷ It is also possible to start out in 2nd gear, for
instance on icy roads.
Seite 114
CONTROLS
Driving
114
Online Edition for Part no. 01402720665 - II/19
Loading ...
Loading ...
Loading ...