User Manual AEG KKE884500B Integrated Coffee Machine

• Owner's manual - (English)

User manual Automatic coffee maker AEG KKE884500B 

Contents

• INTRODUCTION
• Symbols used in these instructions
• Letters in brackets
• Troubleshooting and repairs
• SAFETY
• Fundamental safety warnings
• Designated use
• Instructions
• DESCRIPTION
• Description of the appliance
• Description of the control panel
• Description of milk container and accessories
• PRELIMINARY CHECKS
• Controls after transport
• Installing the appliance
• Connecting the appliance
• USING THE APPLIANCE FOR THE FIRST TIME
• TURNING ON AND HEATING UP
• MAKING COFFEE USING COFFEE BEANS
• CHANGING THE QUANTITY OF COFFEE IN THE CUP
• ADJUSTING THE COFFEE MILL
• MAKING ESPRESSO COFFEE WITH PREGROUND COFFEE (INSTEAD OF BEANS)
• DELIVERING HOT WATER
• CHANGING THE QUANTITY OF HOT WATER
• MAKING CAPPUCCINO
• CHANGING THE QUANTITY OF MILK AND COFFEE FOR CAPPUCCINO
• MAKING A NUMBER OF CUPS OF COFFEE WITH
• THE JUG FUNCTION
• CHANGING JUG FUNCTION PARAMETERS
• CLEANING
• CHANGING AND SETTING MENU PARAMETERS
• TURNING THE APPLIANCE OFF
• TECHNICAL SPECIFICATION
• DISPLAYED MESSAGES
• TROUBLESHOOTING 

CLEANING

Cleaning the waste coffee container: When “EMPTY WASTE COFFEE CONTAINER” is displayed, the waste coffee container must be emptied and cleaned. To clean:

• open theservicedooron thefrontof theappliance, extract the drip tray and clean.
• Empty the waste coffee container and clean thoroughly to remove all residues left on the bottom. This can be done with the spatula on the brush (C8) provided.

Cleaning the drip tray: This could damage the machine. The drip tray is fitted with a level indicator (red) showing the level of water it contains. Before the indicator protrudes from the cup tray, the drip tray must be emptied and cleaned. To remove the tray: 

1. Open the service door
2. Remove the drip tray and the waste coffee container  
3. Clean the drip tray and waste coffee container
4. Replace the drip tray and waste coffee container
5. Close the service door

Cleaning the water tank

1. Clean the water tank (A12) regularly (about once a month) with a damp cloth and a little mild washing up liquid.
2. Remove all traces of washing up liquid.

Cleaning the spouts

1. Clean the nozzles periodically using a sponge.  
2. Check regularly that the holes in the coffee spout are not blocked.

Cleaning the pre-ground coffee funnel  

• Check regularly (aboutoncea month) that thepre-ground coffee funnel is not blocked. If necessary, remove coffee deposits with the brush (C8) supplied.

Cleaning the inside of the coffee maker

1. Check regularly (about once a week) that the inside of the appliance is not dirty. If necessary, remove coffee deposits with the brush (C8) supplied and a sponge.
2. Remove the residues with a vacuum cleaner

Cleaning the brewing unit

1. Make sure the machine is correctly turned off 
2. Open the service doo
3. Remove the drip tray and waste coffee container
4. Press the two red release buttons inwards and at the same time pull the brewing unit outwards
5. Soak the brewing unit in water for about 5 minutes, then rinse. Use the brush (C8) to remove any coffee residues left in the unit.  
6. After cleaning, replace the brewing unit (A5) by sliding it onto the internal support and pin at the bottom, then push the PUSH symbol fully in until it clicks into place.
7. Once inserted, make sure the two red buttons have snapped out.
8. Replace the drip tray and waste coffee container.
9. Close the service door