Loading ...
Loading ...
Loading ...
103
ENGLISH
103
Machine actions Causes Solutions
Co ee is brewed slowly
(see note).
The ground co ee is too ne. Change co ee blend or adjust grinding as
explained in the “Adjusting the Ceramic
Co ee Grinder” chapter.
Circuits clogged. Perform a descaling cycle.
The brew group is dirty. Clean the brew group (see the “Weekly
Cleaning of the Brew Group” chapter).
Co ee leaks out of the
dispensing spout.
The dispensing spout is clogged or
not correctly inserted.
Clean the dispensing spout and its holes
and insert it back correctly.
The dispenser cannot be
installed on the milk carafe.
The pin is in the wrong position. Manually push the pin to the correct
position and insert the carafe dis-
penser.
The machine does not con-
nect to the application.
The mobile device is too far away
from the machine.
Do not step more than 5 metres away
from the machine while using the
mobile device.
Note:
These problems can be considered normal if the co ee blend has been
changed or if the machine has just been installed. In this case wait until
the machine performs a self-adjusting operation as described in the “Saeco
Adapting System” chapter.
Loading ...
Loading ...
Loading ...