Loading ...
Loading ...
Loading ...
102
ENGLISH
Machine actions Causes Solutions
The machine takes a long
time to warm up or the
amount of water dispensed
from the wand is too little.
The machine circuit is clogged by
limescale.
Descale the machine.
The brew group cannot be
removed.
The brew group is out of place. Turn on the machine. Close the service
door. The brew group automatically
returns to the initial position.
The co ee grounds drawer is
inserted.
Remove the co ee grounds drawer
before removing the brew group.
There is too much ground
co ee under or over the
brew group.
The co ee used may not be suitable
for automatic machines.
It may be necessary to change the type
of co ee or the co ee grinder settings
(see the “Adjusting the Ceramic Co ee
Grinder” chapter).
The machine is adjusting the co ee
grinder for a new kind of co ee
beans or pre-ground co ee.
The machine automatically adjusts itself
after brewing several cups of co ee to
optimise the extraction in relation to the
compactness of the ground co ee.
It may be necessary to brew 2 or 3
products to adjust the co ee grinder
completely.
This is not a malfunction of the machine.
The machine produces too
humid or too dry co ee
grounds.
Adjust the co ee grinder. Adjusting the ceramic co ee grinder af-
fects the quality of residues.
If the residues are too humid, set a coarser
grind.
If the residues are too dry, set a ner
grind.
Refer to the “Adjusting the Ceramic Co ee
Grinder” chapter.
The machine grinds co ee
beans but no co ee comes
out.
(see note).
There is no water. Fill the water tank and prime the circuit
(see the "Manual Rinse Cycle" chapter).
The brew group is dirty. Clean the brew group (see the "Weekly
Cleaning of the Brew Group" chapter).
This might occur when the machine
is automatically adjusting the dose.
Brew some cups of co ee as described in
the “Saeco Adapting System” chapter.
The dispensing spout is dirty. Clean the dispensing spout.
Co ee is too weak
(see note).
This might occur when the machine
is automatically adjusting the dose.
Brew some cups of co ee as described in
the “Saeco Adapting System” chapter.
The ground co ee is too coarse. Change co ee blend or adjust grinding as
explained in the “Adjusting the Ceramic
Co ee Grinder” chapter.
The co ee bean hopper selector
switch has been shifted.
Move the selector switch to the “
”
position.
Loading ...
Loading ...
Loading ...