Loading ...
Loading ...
Loading ...
8
mac h i n e aSS e m b ly
FIGURE A
Cover Door
1. Lift the handle to open the cover. Gently spread the sides of the door over the
round hinges and remove.
2. To reinstall the cover door, gently spread the sides of the door and place the
door hinge cutouts over the round hinges.
IMPORTANT NOTES!
Containers:
• The Quiet One® machines are optimized for use with the Vitamix®
48 oz. / 1,4 L Advance® container (3 sided container). The 64 oz. / 2,0 L standard
container will not fit in the compact cover used on the The Quiet One®. Contact
Vitamix customer service at 800-886-5235 or contact your distributor for more
information.
• Outside the United States and Canada, your machine may come with a dierent
container configuration.
Twist Lock Compact Cover
Removal
Note: The twist lock cover is designed
to be removed without the use of tools.
DO NOT force the cover to rotate with
tools or other objects. To avoid damaging
the cover, apply pressure to the cover
frame, not the clear plastic material.
To remove the cover, pressure will be applied
at two points to disengage the cover from
locking tabs on the motor plate.
To remove the twist lock sound enclosure:
1. Remove the compact cover door to
prevent it from closing unexpectedly.
Lift the handle to open the cover. Gently
spread the sides of the door over the round
hinges and remove.
2. Lift up on the front of the centering pad
and peel away from the motor base. Lift
it up and over the drive socket to remove.
(See Figure A).
3. Grasp the bottom frame of the
cover with two hands as shown in
(See Figure B).
FIGURE A
FIGURE C
FIGURE D
FIGURE E
4. With equal pressure and in one motion,
use the index finger of your left hand
to apply pressure at the back of the
cover frame while at the same time
apply pressure with your right thumb to
unlock and twist the cover away from
center in a counter-clockwise direction
(See Figure C).
5. If necessary, continue applying
pressure at these two points until the
cover is free and can be separated
from the motor base (See Figure D).
6. Once disengaged, lift the cover up and
away from the blender base (See Figure
D).
Note: See Figure E for an example of the
motor base with the twist lock compact
cover removed.
FIGURE B
Twist Lock Compact Cover
Installation
1. Put the twist lock compact cover on
top of the blender base. Align the four
locking tabs on the motor adapter plate
with the openings on the compact cover.
(See Figure A).
2. Twist the compact cover clockwise
on the motor base to lock it in place.
(See Figure B).
FIGURE A
FIGURE B
Loading ...
Loading ...
Loading ...