Loading ...
Loading ...
Loading ...
Troubleshooting en-us
45
Dishes not dry. No or too little rinse aid in the
dispenser.
Refill rinse aid.
Wash cycle selected without drying. Select wash cycle with drying.
a "Dishwasher Cycles" on page 32
Water collecting in depressions on
the dishes and silverware.
Arrange dishes in a sloping position,
arrange affected dishes as sloping as
possible.
The combined detergent used has
a poor drying performance
Use different combination detergent with
better drying performance. Use of rinse aid
also increases the drying performance.
extraDry to increase drying not
activated.
Activate extraDry. a "Dishwasher Cycle
Options" on page 33
Dishes were removed too early or
drying process had not ended yet.
Wait until wash cycle ends or wait until 30
min after wash cycle ends before removing
dishes.
The eco rinse aid used has a limited
drying performance.
Use a proprietary rinse aid. Eco products
may have limited effectiveness.
Plastic dishes
not dry.
Inherent properties of plastic. Plastics do not absorb heat and therefore do
not dry as well.
Silverware not
dry.
Silverware not arranged properly in
the silverware basket.
Separate silverware if possible, prevent
contact points.
Silverware not arranged properly in
the third rack.
Arrange silverware properly and separate if
possible.
Dishwasher
interior wet
after rinse
cycle.
No dishwasher fault. With “condensation drying”, steam
condenses into water droplets onto the
walls of the dishwasher tank. The steam
pressure inside the dishwasher pumps the
water out of the dishwasher.
Fault Cause Remedial action
Loading ...
Loading ...
Loading ...