Loading ...
Loading ...
Loading ...
Care and Maintenance en-us
39
WARNING
RISK OF INJURY!
To avoid risk of injury, always
use caution when opening the
door during or following a wash
cycle as hot water or steam
may escape. Do not fully open
the door until water noises have
stopped and steam has
subsided.
Interrupting the wash cycle
CAUTION
Expansion (overpressure) may
cause the appliance door to
open and/or water to escape! If
the door was opened on an
appliance which has a hot water
connection or is heated, always
leave the door ajar for several
minutes and then close.
1.
Open the door.
2.
Switch off On/Off switch (.
The LED’s go out. The wash cycle
is saved.
3.
To continue the wash cycle,
switch on the On/Off switch (
again.
4.
Close the door.
Note: Your dishwasher is protected
against unintentional operation. If the
appliance door remains open for
more than 4 seconds after pressing
the Start button, the operation will be
paused. Press the Start button again
and close the appliance door.
Terminating the wash cycle
(Reset)
Terminating the wash cycle
1.
Open the door.
2.
Press the Start button )* and
hold for 3 seconds
The digital display @ shows:
"Program was terminated".
3.
Close the door.
The wash cycle sequence lasts
approx. 1 min. The digital display
@ shows: “Finished”.
4.
Open the door.
5.
Switch off On/Off switch (.
6.
Close the door.
Changing the wash cycle
When the Start button ( has been
pressed, the wash cycle cannot be
changed. The only way a wash cycle
can be changed is by terminating the
wash cycle (Reset).
2 Care and
Maintenance
Care and Maintenance
A regular inspection and
maintenance of your machine will
help to prevent faults. This saves time
and prevents future problems.
Overall condition of the
dishwasher
NOTICE
ʋ Never use a steam cleaner to
clean your dishwasher. The
manufacturer is not liable for any
resulting damage.
ʋ Regularly wipe the front of the
appliance with a damp cloth -
water and a small amount of
liquid soap is adequate. Do not
use sponges as they could
scratch the surfaces.
ʋ Do not use bleach-based wipes
as they could damage the surface
or printing.
Loading ...
Loading ...
Loading ...