Loading ...
Loading ...
Loading ...
en-us Getting Started
12
The selected setting has now been
stored.
Note: If the appliance was
disconnected from the power supply
for a prolonged period, the time
starts at 12:00 o’clock. Set the time.
Switching on the appliance
for the first time
When the dishwasher is switched on
for the first time, you are taken
directly to the settings for switching
on the appliance for the first time.
Note: If you select Home Connect
during the initial start-up, make
further settings via your dishwasher
app. Observe the supplied Home
Connect documents.
The following text is indicated on the
display window at the top @:
Scroll with < >
Set with + -
Leave with Setup 3 sec.
The required settings for switching on
the appliance for the first time are
listed in the table below.
Change the setting as follows:
1.
Keep pressing button > )R until
the required setting is displayed.
2.
Make the selection with setting
buttons + - X.
3.
Press and hold the Info button
8 for 3 seconds.
The selected setting has now been
stored.
Settings
Switching on the
appliance for the first
time
Factory setting Infotext
by pressing Info button
Language American English Language selection.
Home Connect Manual/
Home Connect
Manual/Home Connect
Time format 24h 12h or 24h.
Time setting 12:00 Set the current time.
Water hardness °E0-8 Soft Setting water hardness. When using Multitabs,
select the lowest setting.
Rinse aid disp. Level 5 Amount of rinse aid affects drying. When using
Multitabs, select setting 0.
Loading ...
Loading ...
Loading ...