Loading ...
Loading ...
Loading ...
Overview of programmes en
29
0 Settings
Program setting Function
Note: Not all settings can be activated in every program. The activated settings are displayed on the but-
tons or on the display. You can change or deactivate the activated settings by repeatedly pressing on the
relevant buttons.
} (Remote Start) Pressing } (Remote Start) allows you to start the appliance remotely via the
Home Connect app or to call up the Home Connect settings.
Notes
■ Please observe the instructions for the ambient temperatures
~ Page 68.
■ Remote start can only be activated if the appliance door is closed and the
appliance is connected to your home network.
■ Remote start is deactivated for safety reasons in the following circum-
stances:
■ Open the door,
■ Power failure,
■ Press A (Start/Pause) on the appliance,
■ Briefly press } again,
■ Press # to switch off the appliance.
‰ ü (Drying Target): The dryness level defines how damp or dry the laundry is after the pro-
gramme ends.
If you have set a dryness level, this is retained even after the appliance has
been switched off for the relevant programme. Exception: The settings are
not saved for Cottons.
Ò (C/board dry extra) Multi-layered, thick laundry that does not dry readily.
» (C/board dry) Normal, single-layered laundry.
ö (Iron dry) Normal, single-layered laundry that still needs to be damp after drying and is
suitable for ironing or hanging up.
Q (Anti-Crease) The drum moves the laundry at regular intervals after drying to prevent creas-
ing. You can activate or deactivate the automatic Anti-Crease function for the
indicated duration in minutes.
ñ (Ready in) Before starting the programme, you can delay the time at which the pro-
gramme ends by up to 24 hours using × and Ö.
The set time in hours, e.g. 8 h, is shown in the display and counts down until
the programme starts. Once the programme has started, the programme
duration is displayed.
Note: Observe the information about the ambient temperatures
~ Page 68.
‰ ü The drying time for timed programmes can be extended in 10-minute
increments using × and Ö.
Loading ...
Loading ...
Loading ...