Loading ...
Loading ...
Loading ...
The essentials
Note
There is also a valve mark on the back of the
centra
l wheel trim that indicates the correct
alignment.
Wheel bolt caps*
Fig. 72 Wheel: wheel bolts with caps.
Removal
●
Fit the plastic clip (vehicle tools
›
›
›
Fig. 70
7
) over the cap until it clicks into
p
l
ac
e
›››
Fig. 72.
●
Remove the cap with the plastic clip.
Anti-theft wheel bolts
Fig. 73 Anti-theft wheel bolt with cap and
a
d
apt
er.
●
Remove the wheel cover* or the cap*.
●
Insert the special adapter (vehicle tools)
ont
o the anti-thef
t
wheel bolt and push it on
as far as it will go.
●
Insert the wheel brace (vehicle tools) onto
the adapter as far as it will go.
●
Remove the wheel bolt ››› page 65.
Note
Make a note of the code number of the anti-
theft wheel
bolt and keep it in a safe place,
but not in your vehicle. If you need a new
adapter, you can obtain it from the SEAT Offi-
cial Service, indicating the code number.
Loosening the wheel bolts
Fig. 74 Wheel: loosen the wheel bolts.
●
Insert the box spanner (vehicle tools) onto
the wheel
bo
lt
as far as it will go. An adapter
is required to unscrew or tighten the anti-
theft wheel bolts ››› page 65.
●
Turn the wheel bolt approximately one turn
to the left ››› Fig. 74 (arrow). To apply the re-
quired torque, hold the wheel brace at the
end. If it is not possible to loosen a wheel
bolt, carefully apply pressure with one foot
on the end of the box spanner. Hold on to the
vehicle for support and take care not to slip.
WARNING
Slightly loosen the wheel bolts (one turn) be-
fore r
aising the vehicle with the jack*. If not,
an accident may occur.
65
Loading ...
Loading ...
Loading ...