Loading ...
Loading ...
Loading ...
10
Single-dose laundry packets, Oxi-type boosters, color-safe
bleach, or scented crystals can be added to the drum prior
to adding laundry. When using single-dose laundry packets,
make sure that the bulk dispenser is disabled or off (see
Step 12).
NOTE: Always follow manufacturer’s instructions.
Using the All-In-One Washer/Dryer
Sort items by recommended cycle, water temperature,
and colorfastness. Separate heavily soiled items from lightly
soiled. Separate delicate items from sturdy fabrics. Treat
stains promptly and check for colorfastness by testing stain
remover products on an inside seam.
IMPORTANT:
■ Empty pockets. Loose change, buttons, or any small
object can plug pumps and may require a service call.
■ Close zippers, fasten hooks, tie strings and sashes,
and remove non-washable trim and ornaments.
■ Mend rips and tears to avoid further damage to items
during washing.
■ Turn knits inside out to prevent pilling. Separate lint-takers
from lint-givers. Synthetics, knits, and corduroy fabrics will
pick up lint from towels, rugs, and chenille fabrics.
■ Do not dry garments if stains remain after washing,
because heat can set stains into fabric.
■ Always read and follow fabric care labels and laundry
product instructions. Improper usage may cause damage
to your garments.
1. Sort and prepare your laundry
First wash cycle without laundry
Before washing clothes for the rst time, set up the Load & Go™
bulk dispenser or add detergent to the single-dose dispenser
(see the “Using the Dispensers” section). Choose the Regular
(what to wash) and Quick (how to wash) cycle and run it without
clothes. Use only HE detergent. This initial cycle serves to ensure
the interior is clean.
Place a load of sorted items loosely in the washer/dryer.
Items need to move freely for best cleaning and to reduce
wrinkling and tangling. If using the drying option, loading
the drum half full or less and not interrupting the drying cycle
by opening the door will improve drying performance and
cycle time. Close the washer/dryer door by pushing it rmly
until the latch clicks.
■ Push load fully into the washer/dryer. Make sure no items
are resting on the rubber seal to avoid trapping them
between the seal and the door window.
■ Mix large and small items and avoid washing single items.
Load evenly.
■ Wash small items in mesh garment bags. For multiple
items, use more than one bag and ll bags equally.
3. Load laundry into washer/dryer
2. Add laundry products, if desired
Loading ...
Loading ...
Loading ...