Loading ...
Loading ...
Loading ...
15
2.4 GHz Digital Wireless Stereo Headphones
www.insigniaproducts.com
Listening to your headphones
1 Turn on the headphones and docking station. Make sure that your
docking station and headphones are paired. See “Turning on and
pairing the system” on page 14.
2 Set the headphone volume level to the minimum.
3 Put your headphones on your head. Adjust the fit until you feel
comfortable.
4 Turn on your audio source (such as a TV or stereo system) and begin
playback. Depending on the audio source, you may need to turn up
the volume.
5 Adjust the headphone volume to your normal listening level.
Turning off the system
1 Press and hold (more than two seconds) the (power) button on the
headphones.
2 Slide the OFF/ON switch on the docking station to OFF to turn off the
system.
Maintaining your system
Use a soft cloth dampened with a weak solution of mild detergent and
water. Dry the device immediately afterwards with a clean cloth. Do not
use abrasive cloth, thinners, alcohol, or other chemical solvents, because
they may damage the finish or remove the panel lettering.
Caution
Continuous use at high volume may permanently damage your
hearing.
Note
If the system is connected to a TV, you may want to turn off the
TV sound to prevent hearing sound from the TV speakers. Refer
to your TV manual.
Note
It’s important to turn the headphones off when not in use to
conserve the battery, or if you prefer you can leave them on as
long as they are placed in the docking station.
NS-WHP314_16-1010_MAN_V2_ENG.fm Page 15 Monday, December 5, 2016 6:49 PM
Loading ...
Loading ...
Loading ...