Loading ...
Loading ...
Loading ...
9. Stop the engine. Allow the arrester to cool.
10. Reinstall the arrester clean-out plug and remove the exhaust outlet cover or
plug.
ARRESTER CLEANING (SCRAMBLER)
If your model is equipped with dual exhaust, periodically perform the following
procedure for both arresters to remove accumulated carbon.
1. Remove the retaining nut. Remove the arrester
w
from the end of the muffler
q
.
2. Use a non-synthetic brush to clean the arrester screen
e
. A synthetic brush
may melt if components are warm. If necessary, blow debris from the screen
with compressed air.
3. Inspect the screen for wear and damage. Replace a worn or damaged
screen.
4. Reinstall the arrester. Torque the nut
r
to 10-12 Nm.
131
MAINTENANCE
Loading ...
Loading ...
Loading ...