Loading ...
Loading ...
Loading ...
OIL AND FILTER CHANGE
See the Lubrication Guide section for fluid recommendations, capacities and
plug torques. Always change the oil and filter at the intervals outlined in the
Periodic Maintenance Chart. Always change the oil filter whenever changing oil.
1. Position the vehicle on a level surface. Place the transmission in PARK.
2. Start the engine. Allow it to warm up at idle for two to three minutes.
3. Stop the engine.
4.
SCRAMBLER: On the bottom of the vehicle, a guard plate covers the oil
filter access hole
q
. Remove the three bolts securing the guard plate and
remove the guard plate.
5. Clean the area around the drain plug
w
.
6. Place a drain pan under the crankcase.
7. Remove the drain plug. Allow the oil to drain completely.
WARNING
Hot oil can cause burns to skin. Do not allow hot oil to contact skin.
8. Install a new sealing washer on the drain plug. The sealing surfaces on drain
plug and crankcase should be clean and free of burrs, nicks or scratches.
9. Reinstall the drain plug. Torque to specification.
102
MAINTENANCE
Loading ...
Loading ...
Loading ...