Loading ...
Loading ...
Loading ...
1-5
BEFORE USING THE MACHINE
Contents
INTERIOR
(1) Toner cartridges
This cartridge contains toner.
When the toner in a cartridge runs out, replace with new
one.
+
REPLACING THE TONER CARTRIDGE (page 1-75)
(2) Fusing unit
Heat is applied here to fuse the transferred image onto
the paper.
(3) Photoconductive drum
Images are formed on the photoconductive drum.
(4) Right side cover
Open this cover to remove a misfeed.
(5) Paper reversing section cover
This is used when 2-sided printing is performed. Open
this cover to remove a paper misfeed.
(6) Bypass tray
Use this tray to feed paper manually.
When loading a large sheet of paper, be sure to pull out
the bypass tray extension.
+
LOADING PAPER IN THE BYPASS TRAY (page 1-37)
(7) Main power switch
This is used to power on the machine.
When using the fax or Internet fax functions, keep this
switch in the "on" position.
+ TURNING THE POWER ON AND OFF (page 1-15)
(8) Toner collection container
This collects excess toner that remains after printing.
+ REPLACING THE TONER COLLECTION
CONTAINER (page 1-77)
(9) Toner collection container release lever
Move this lever when you need to release the toner
collection container lock to replace the toner collection
container or clean the laser unit.
+ REPLACING THE TONER COLLECTION
CONTAINER (page 1-77)
(10) Handle
Pull this out and grasp it when moving the machine.
(11) Right cover of paper drawer
(when a paper drawer is installed)
Open this to remove a paper misfeed in tray 2, tray 3 or
tray 4.
(12) Paper tray right side cover
Open this to remove a paper misfeed in tray 1.
(13) Right side cover release lever
To remove a paper misfeed, pull and hold this lever up to
open the right side cover.
(1)
(6)
(2)
(3)
(4)
(5)
(13)(12)(11)(10)(9)(8)(7)
Caution
The fusing unit is hot. Take care not to burn yourself
when removing a paper misfeed.
Do not touch or damage the photoconductive drum.
This may cause a defective image.
Your service technician will collect the toner collection
container.
Loading ...
Loading ...
Loading ...