Loading ...
Loading ...
Loading ...
64
1.
Turn the projector off, and unplug the power cord. Allow the
projector to cool sufciently.
2.
After making sure that the projector has cooled adequately,
pull the slot cover forward, pushing slightly its edge up, and
remove it from the projector.
3.
Remove the battery case.
Hold the battery case gutter by nger nail or other thing and pull
out the battery case slowly from the battery slot.
4.
Take the old battery out from the battery case.
5.
Replace a new battery.
Replace battery with HITACHI MAXELL, Part No.CR2032
or CR2032H only. Use of another battery may present a risk
of re or explosion.
Put a new battery into battery case. Please make sure that
the + is facing upward. Insert the battery case slowly into the
battery slot until you hear the snap.
6.
Close the slot cover.
Replace the slot cover by reversing the procedure used
when removing the cover.
Maintenance
WARNING ►Always handle the batteries with care and use them only as
directed. Battery may explode if mistreated. Do not recharge, disassemble or
dispose of in re.
And also improper use may result in cracking or leakage, which could result in
re, injury and/or pollution of the surrounding environment.
• Be sure to use only the batteries specied. Do not use batteries of different
types at the same time. Do not mix a new battery with used one.
•
Make sure the plus and minus terminals are correctly aligned when loading a battery.
• Keep a battery away from children and pets. If swallowed consult a physician
immediately for emergency treatment.
• Do not short circuit or solder a battery.
•
Do not allow a battery in a re or water. Keep batteries in a dark, cool and dry place.
•
If you observe a leakage of a battery, wipe out the ower and then replace a battery.
If the liquid adheres to your body or clothes, rinse well with water immediately.
• Obey the local laws on disposing the battery.
Internal clock battery
Consumption of the battery makes the clock not to work correctly. When the clock is wrong or it has
stopped, please replace the battery according to the following procedures.
SD CARD
Slot Cover
Battery Slot
Battery Case
Battery
Battery
Case
Battery
Case
Battery (+)
Battery (-)
NOTE • The internal clock’s time will be reset when the battery is removed.
Please recongure the time via the menu or a web browser after replacing the battery.
(
4.1.8 Date/Time Settings of the User’s Manual - Network guide)
Loading ...
Loading ...
Loading ...