Loading ...
Loading ...
Loading ...
10
Setting up
Using a USB storage
In order to view images stored in a USB storage, such as a USB memory, insert
the device into the USB STORAGE port.
Before removing the USB storage, be sure to perform the REMOVE procedure
using the SERVICE menu under the MIU menu (
59).
NOTE •
When using the projector with a wired LAN, please remove the wireless network card.
IMPORTANT NOTE •
To comply with FCC RF exposure compliance requirements, the antenna
used for this transmitter must be installed to provide a separation distance of at least 20 cm from all
persons and must not be collocated or operating in conjunction with any other antenna or transmitter.
• When using wireless network card, please make sure to put the SD card slot cover
onto projector top case to protect the card from electrostatic discharge inuence.
Using an SD card
In order to view images in an SD Memory Card (SD
card), insert the card into the SD card slot. If the
wireless network function is required, load the internal
clock battery
(
64)
and insert the enclosed Wireless
network card (SD card) in to the SD card slot.
Inserting an SD card
1.
Make sure that the power code is not
plugged into the projector.
2.
Remove the SD card slot cover. It might be recommended
to hook the edge of its side face up to remove it.
3.
Slowly insert the SD card completely into
the SD card slot. Make sure that the angled
corner of the SD card is placed into the right
side of the SD card slot, while inserting.
4.
Replace the SD card slot cover. It is recommended that the cover is slid
sideways to the projector.
Using the slot cover lock for security
Using the enclosed slot cover lock can prevent the SD card slot cover from being opened.
1.
Open the two plates of the slot cover lock to put the tips of two plates
together, and then insert the tips to the lock hole of the SD card slot cover.
2.
Put the body of the two plates together. Then, hook a padlock or combination
lock to the hole of the slot cover lock.
Removing the SD card
When removing “wireless network card“, turn the projector off and unplug the
power cord.
On the other hand, when removing the “SD Memory Card”, be sure to perform the
REMOVE procedure using the SERVICE menu under the MIU menu (
59).
SD CARD
SD card slot
SD card slot cover
SD card slot
SD card
Angled corner
SD CARD SD CARD
Loading ...
Loading ...
Loading ...