Loading ...
Loading ...
Loading ...
39
SCREEN menu
SCREEN menu (continued)
Item Description
SOURCE NAME
Each input port for this projector can have a name applied to it.
(1) Use the ▲/▼ buttons on the SCREEN menu to select SOURCE
NAME and press the ► button.
The SOURCE NAME menu will be displayed.
(2) Use the ▲/▼ buttons on the SOURCE
NAME menu to select the port to be
named and press the ► button. Right
side of the menu is blank until a name is
specied.
The SOURCE NAME dialog will be
displayed.
(3) The current name will be displayed on
the rst line. Use the ▲/▼/◄/► buttons
and the ENTER or INPUT/ENTER
button to select and enter characters.
The RESET button can be used to erase
1 character at a time. Also if you move
the cursor to DELETE or ALL CLEAR
on screen and push the ENTER or
INPUT/ENTER button, 1 character or all
characters will be erased. The name can
be a maximum of 16 characters.
(4) To change an already inserted
character, press the ▲ button to move
the cursor to the rst line, and use the
◄/► buttons to move the cursor on the
character to be changed.
After pressing the ENTER or INPUT/ENTER button, the
character is selected. Then, follow the same procedure as
described at the item (3) above.
(5) To nish entering text, move the cursor to the SAVE on screen
and press the ENTER or INPUT/ENTER button. To revert to the
previous name without saving changes, move the cursor to the
CANCEL on screen and press the ENTER or INPUT/ENTER
button.
TEMPLATE
Using ▲/▼ buttons switches the mode for the template screen. The
selected template pattern can be displayed when the MY BUTTON
allocated to the TEMPLATE function is pressed (
42).
DOT-LINE4
ó
DOT-LINE3
ó
DOT-LINE2
TEST PATTERN
ó
DOT-LINE1
Loading ...
Loading ...
Loading ...