Loading ...
Loading ...
Loading ...
Drying is faster if you use rinse aid. When the rinse
aid needs topping up, the above symbol lights on the
display.
Top up with rinse aid
Top up with rinse aid as follows:
1.
Open the rinse aid compartment lid.
2.
Carefully top up with rinse aid. Only add rinse aid
to the level marked max.
3.
Wipe up any splashes of rinse aid around the
compartment.
4.
Close the lid firmly.
NOTE!
After topping up, it may take a while before the
symbol goes out.
Select dosage
The rinse aid dispenser can be adjusted between 0
(off) and 6. At the factory, the rinse aid dispenser is
set to 1.
Increase the rinse aid dosage:
•
If the dishes have water marks.
Reduce the rinse aid dosage:
•
If the dishes have a sticky white/blue film.
•
If the dishes are streaked.
•
Build-up of foam. If you have very soft water, the
rinse aid can be diluted 50:50 with water.
For water with a hardness greater than 10–12 °dH,
you ought to use rinse aid with citric acid (known as
acid rinse aid).
Set the dosage
The section Settings describes how to set the rinse
aid dosage.
22
Rinse aid
Loading ...
Loading ...
Loading ...