Loading ...
Loading ...
Loading ...
14 49-80835 Rev. 3
USING THE COOKTOP: Custom Settings
Custom Settings
1. Press and hold Sync Burners pad for 3 seconds,
then immediately press and hold the Timer pad for
3 seconds to enter custom settings. Those two pads
must be pressed within 30 seconds. Any other pad
will cancel mode.
2. “C - -” appears on display. To navigate through the
Custom Settings, use the (up) or (down) pads. If
(up) is selected the display cycle starts at “C01”. If
(down) is selected, the display cycle starts at “C54”.
3. To activate a new Custom Setting the user will touch
and hold the Timer pad for 3 sec. Only ONE of the
Custom Setting Choices can be activated for each
Custom Setting. The red “On” LED will turn on and a
sound will go off once a new custom setting is activated.
4. The cooktop will exit Custom Settings if it is inactive
for 3 minutes.
5. To exit Custom Settings and save any changes, touch
and hold the Sync Burners pad for 3 seconds.
* Options in grey are default settings
Custom Settings Chart
Custom Settings Custom Setting Choices
C0 (Factory Settings) C01 - Factory Reset (Clears customized settings and restores defaults)
C02 - Custom settings activated (Not visible unless any other custom setting is selected. And automatically on
when any other custom setting is selected. Not selectable by user.)
C1 (Control Lock) C11 - Standard Lock (ie; Only on when lock button pressed for 3 seconds.) If using a timer,
Control Lock is unavailable.
C12 - Auto Lock (ie; Engages after cooktop has been in standby mode for 10 minutes.) The unit should be
completely off to go into Auto Lock.
C2 (LED light level) C21 - Full illumination
C22 - Medium illumination
C23 - Lowest illumination
C3 (Button Loudness) C31 - All sounds activated at 100% (For alarm sounds, 100% = Whatever level is set in c4.)
C32 - Button sound level reduced by 50%, Alarm sounds at 100%
C33 - Button sounds deactivated, Alarm sounds activated at 100%
C4 (Timer Alarm Loudness) C41 - High
C42 - Low
C5 (Timer Alarm Duration) C51 - Indefinite (ie; alarm continues until cancelled by user).
C52 - Alarm sounds for 60 seconds.
C53 - Alarm sounds for 30 seconds.
C54 - Alarm sounds for 15 seconds.
Loading ...
Loading ...
Loading ...