Loading ...
Loading ...
Loading ...
Do not initialize the run-flat tires after mount‐
ing snow chains, as doing so may result in in‐
correct readings.
Do not reset the Tire Pressure Monitor TPM
after mounting snow chains, as doing so may
result in incorrect readings.
When driving with snow chains, briefly activate
Dynamic Traction Control DTC, if needed.
Maximum speed with snow chains
Do not exceed a speed of 30 mph/50 km/h
when using snow chains.
Changing wheels/tires
General information
When using run-flat tires or a flat tire kit, a
wheel does not always need to be changed im‐
mediately when there is a loss of tire inflation
pressure due to a flat tire.
If needed, the tools for changing wheels are
available as accessories from a dealer’s service
center or another qualified service center or re‐
pair shop.
Safety information
DANGER
The vehicle jack is only provided for
short-term lifting of the vehicle for wheel
changes. Even if all safety measures are ob‐
served, there is a risk of the raised vehicle fall‐
ing, if the vehicle jack tilts over. There is a risk
of injuries or danger to life. If the vehicle is
raised, do not lie under the vehicle and do not
start the engine.◀
WARNING
The vehicle jack is provided by the vehi‐
cle manufacturer for changing wheels in the
event of a flat tire. The vehicle jack is not de‐
signed for frequent use, for instance for chang‐
ing from summer to winter tires. Using the ve‐
hicle jack frequently may cause it to jam or
become damaged. There is a risk of injury and
risk of damage to property. Only use the vehi‐
cle jack to change an emergency wheel or a
spare tire in the event of a flat tire.◀
WARNING
On soft, uneven or slippery ground, for
example snow, ice, tiles, etc., the vehicle jack
can slip away. There is a risk of injury. If possi‐
ble, change the wheel on a flat, solid, and slip-
resistant surface.◀
WARNING
The vehicle jack is optimized for lifting
the vehicle and for the jacking points on the
vehicle only. There is a risk of injury. Do not lift
any other vehicle or cargo using the vehicle
jack.◀
WARNING
If the vehicle jack is not inserted into the
jacking point provided for this purpose, the ve‐
hicle may be damaged or the vehicle jack may
slip when it is being cranked up. There is a risk
of injury or risk of damage to property. When
cranking up the vehicle jack, ensure that it is
inserted in the jacking point next to the wheel
housing.◀
WARNING
A vehicle that is raised on a vehicle jack
may fall off of the jack if lateral forces are ex‐
erted on it. There is a risk of injury and risk of
damage to property. While the vehicle is
raised, do not exert lateral forces on the vehicle
or pull abruptly on the vehicle. Have a stuck
wheel removed by a dealer’s service center or
another qualified service center or repair
shop.◀
Securing the vehicle against rolling
General information
The vehicle manufacturer recommends to ad‐
ditionally secure the vehicle against rolling
away when changing a wheel.
Seite 232
Mobility Wheels and tires
232
Online Edition for Part no. 01402981185 - VI/17
Loading ...
Loading ...
Loading ...