Loading ...
Loading ...
Loading ...
Distance display
Distance 1
Distance 2
Distance 3
Distance 4
This value is set automatically after
the system is switched on.
The system has been interrupted or
distance control is temporarily sup‐
pressed because the accelerator
pedal is being pressed; a vehicle
was not detected.
Distance control is temporarily sup‐
pressed because the accelerator
pedal is being pressed; a vehicle
was detected.
Detected vehicle
Symbol lights up orange:
A vehicle has been detected ahead of
you.
Rolling bars: the detected vehicle has driven
away.
ACC does not accelerate. To accelerate, acti‐
vate ACC by briefly stepping on the accelera‐
tor pedal or pressing the RES button or the
rocker switch.
Indicator/warning lights
Symbol flashes orange:
The conditions are not adequate for
the system to work.
The system was deactivated but applies the
brakes until you actively resume control by
pressing on the brake pedal or accelerator
pedal.
Symbol flashes red and a signal
sounds:
Brake and make an evasive maneuver,
if necessary.
Displays in the Head-up Display
Some system information can also be dis‐
played in the Head-up Display.
Distance information
The symbol is displayed when the dis‐
tance from the vehicle traveling ahead
is too short.
The distance information is active under the
following circumstances:
▷ Active Cruise Control switched off.
▷ Display in the Head-up Display selected,
refer to page 104.
▷ Distance too short.
▷ Speed greater than approx.
40 mph/70 km/h.
System limits
Detection range
The detection capacity of the system and the
automatic braking capacity are limited.
Two-wheeled vehicles for instance might not
be detected.
Seite 156
Controls Driving comfort
156
Online Edition for Part no. 01402981185 - VI/17
Loading ...
Loading ...
Loading ...