Loading ...
Loading ...
Loading ...
29 69-2715EF—07
Changing system setup
System Setup Options (MENU > System Setup)
Screen Title Settings and Options
Language English/Français/Español.
Thermostat
installed in
Home/Business (Thermostat is used in a residential (default) or
commercial setting).
Your thermostat
location
Touch
THERMOSTAT button to display a screen where you can
enter a custom name using a keypad. If you have only one thermostat,
you can leave the name as THERMOSTAT. For business installations
you can check a box to display the thermostat name on the home
screen.
Your thermostat
controls
Select Heating or Cooling or both (default).
Your system type
Select Forced Air (default), Heat Pump, or Hot Water or Steam. Each
option offers different choices on the following screens. See Step 9e
under Installing your Thermostat on page 10.
Your forced air
heating system
type
Select how your forced air system is powered: Gas/Oil (default) or
Electric.
Efficiency of your
heating system
Select Standard Efficiency Forced Air (default) or High Efficiency
Forced Air.
Your heating
system type
If you selected Hot Water or Steam on “Your system type,” select the
specific heating system here.
Number of cooling
stages
Select 1 Stage (default) or 2 Stages. If you are unsure, note which
wires you have connected: ‘Y’ wire only (1 stage) or ‘Y’ and ‘Y2’(refer to
your check list in Step 6 on page 5.)
Number of heating
stages
Select 1 Stage (default) or 2 Stages. If you are unsure, note which
wires you have connected: ‘W’ wire only (1 stage) or ‘W’ and ‘W2’ (refer
to your check list in Step 6 on page 5.)
Your fan control
Select whether your thermostat (default) or heating system controls
the fan.
Type of changeover
valve
If you selected Heat Pump on “Your system type,“ select whether it
uses a cooling changeover valve (default) or heating changeover valve.
If you are unsure, note which wires you have connected: refer to your
check list in Step 6 on page 6.
Number of heat
pump compressor
stages
Select 1 Stage (default) or 2 Stages. If you are unsure, note which
wires you have connected: ‘Y’ wire only (1 stage) or ‘Y’ and ‘Y2’(refer to
your check list in Step 6 on page 6.).
Your backup heat
No or Yes (default) you can determine whether you have backup heat
by referring to your check list in Step 6 on page 6..
Note: Touch the orange Help button on any screen for more information.
Loading ...
Loading ...
Loading ...