Loading ...
Loading ...
Loading ...
6
USING YOUR HUMIDIFIER – HEV620
Power
1. Plug humidifier into a 120V outlet.
CAUTION:
To avoid electric shock, DO NOT plug humidifier into outlet with
wet hands.
2. Press Power Button (A).
Humidifier will turn on to high output and high humidity settings. Press again to turn off.
If humidifier was programmed before turning off, previous settings will be remembered.
Unplugging the humidifier resets to default settings.
Moisture Output
3. Press the Moisture Output button (B) to toggle through low, medium, and high
moisture output settings.
A higher setting will provide more moisture output. The fan will pull more moisture off the
Wicking Filter and into the air. The water level in the Water Tank will decrease faster with a
higher setting, since more moisture is going into the air.
A lower setting will provide less moisture output. The fan will run quieter, and the Water Tank
will not have to be filled as frequently, since less moisture is going into the air.
NOTE: While the humidifier is operating, you will hear the fan running but will not see the
moisture output. This is normal for an evaporative humidifier.
Humidity Control
4. Press the Humidity Control arrows (C) to set the desired humidity level.
To scroll through the numbers faster, press and hold the arrow for 3 seconds.
Release the button once the desired level is shown. Display will blink three times showing
the SET humidity level, then the display will return to show the current room humidity level.
CURRENT will illuminate on the display to indicate the curent room humidity level.
Key
A. Power
B. Moisture Output
C. Humidity Control
D. Timer
E. Check Filter
F. Refill
Symbols
(Canada only)
B. Moisture
Output
D. Timer
E. Check
Filter
F. Refill
A
B
C
D
E
F
HEV620 Digital Display
Loading ...
Loading ...
Loading ...