Loading ...
Loading ...
Loading ...
14
TROUBLESHOOTING
Problem Possible Cause Solution
Humidifier shuts off
Set Humidity level has been
reached
Water Tank is empty
Timer has expired
(HEV620 only)
Increase Moisture Output
setting. See Using your
Humidifier section
Fill the Tank with Water
Turn on humidifier by
pressing the Power button.
Set Moisture Output and
Humidity Control. See
Using your Humidifier.
Water is not draining
into Reservoir
Float Paddle not installed
correctly
Plunger is stuck
See Float Paddle Installation
instructions in Setting Up
Your Humidifier
Push and release Plunger to
be sure it is moving freely
Water leaking from
Base or Reservoir
Float Paddle is not
installed correctly
Plunger is damaged
Plunger is sticking
Plunger may have foreign
material stuck under the
Tank Gasket
Tank is cracked
See Float Paddle Installation
instructions in Setting Up
Your Humidifier
Contact Consumer Relations
Push and release Plunger to
be sure it is moving freely
At sink, push and release
Plunger system so water
may flow.
Inspect tank for damage;
contact Consumer Relations
If your humidifier is not working properly, refer to the following:
For additional troubleshooting help, call Consumer Relations at 800-477-0457.
Loading ...
Loading ...
Loading ...