Loading ...
Loading ...
Loading ...
14 INSTALLATION
Leveling and Door Alignment
Aligning the doors may not be possible if the floor is
not level, or is of weak or poor construction. The
refrigerator is heavy and should be installed on a rigid
and solid surface.
Wood flooring may cause leveling difficulties if it
flexes excessively.
Leveling
•
If the oor is uneven, level the refrigerator to avoid
noise and vibration.
CAUTION
•
Adjust the front leveling feet so they are lower
than the wheels. The weight of the refrigerator
must rest on the feet, not the wheels, to avoid
risk of movement of tipover.
Using
Screwdriver
To level the refrigerator, use a screwdriver to turn the
leveling feet until they are in firm contact with the
floor. The front of the refrigerator can be slightly
higher than the rear to make shutting the doors
easier.
Door Alignment
•
If the left side door is lower, adjust the hinge on the
left
①
.
•
If the right side door is lower, adjust the hinge on
the right
②
.
•
Snap rings are provided with this unit. Open the
door and lift it from the bottom. Insert snap ring(s)
as shown until the doors are aligned.
Height difference
Snap rings
Turning on the Power
•
After installing, plug the refrigerator’s power cord
into a 3-prong grounded outlet and push the
refrigerator into the final position.
CAUTION
•
Connect to a rated power outlet.
•
Have a certied electrician check the wall outlet
and wiring for proper grounding.
•
Do not damage or cut off the ground terminal of
the power plug.
Loading ...
Loading ...
Loading ...