Loading ...
Loading ...
Loading ...
20
N.B.: If the appliance is not used for an extended period,
place the main switch (A19) on the back of the appliance in the
0 position.
TECHNICAL SPECIFICATION
Voltage: 220-240 V~ 50/60 Hz max. 10A
Absorbed power: 1350W
Pressure: 15 bars
Water tank capacity: 1.7 litres
Size LxHxD: 595 x 455 x 412 mm
Weight: 26 kg
The appliance complies with the following EC direc-
tives:
-
ments;
Materials and accessories coming into contact with food con-
form to European regulation (EC) no. 1935/2004.
DISPOSING OF THE APPLIANCE
In compliance with European directive 2002/96/EC, the appli-
ance must not be disposed of with household waste, but taken
to an authorised waste separation and recycling centre.
ELECTRICAL CONNECTION UK ONLY
A) If your appliance comes tted with a plug, it will incorpo-
rate a 13 Amp fuse. If it does not t your socket, the plug
should be cut o from the mains lead, and an appropriate
plug tted, as below.
WARNING: Very carefully dispose of the cut o plug after
removing the fuse: do not insert in a 13 Amp socket else-
where in the house as this could cause a shock hazard.
With alternative plugs not incorporating a fuse, the circuit
must be protected by a 15 Amp fuse. If the plug is a mould-
ed-on type, the fuse cover must be re-tted when chang-
ing the fuse using a 13 Amp Asta approved fuse to BS 1362.
In the event of losing the fuse cover, the plug must NOT be
used until a replacement fuse cover can be obtained from
your nearest electrical dealer. The colour of the correct re-
placement fuse cover is that as marked on the base of the
plug.
B) If your appliance is not tted with a plug, please follow the
instructins provided below:
WARNING - THIS APPLIANCE MUST BE EARTHED
IMPORTANT
The wires in the mains lead are coloured in accordance with the
following code:
Green and yellow: Earth
Blue: Neutral
Brown: Live
As the colours of the wires in the mains lead may not corre-
spond with the coloured markings identifying the terminals in
your plug, proceed as follows:
The green and yellow wire must be connected to the terminal
in the plug marked with the letter E or the earth symbol or
coloured green or green and yellow.
The blue wire must be connected to the terminal marked with
the letter N or coloured black.
The brown wire must be co
Loading ...
Loading ...
Loading ...