Loading ...
Loading ...
Loading ...
18
Setting the clock
To set the clock, proceed as follows:
comes on) then press the NEXT button (C3) repeatedly until
the appliance displays: “CLOCK… 00:00”.
(If you hold the CHANGE button (C4) down, the time is
changed rapidly).
NEXT (C3) to change other parameters.
Setting auto-start time
This function programmes the time the machine will come on
automatically to be ready for use.
the previous section.
comes on) then press the NEXT button (C3) repeatedly until
the appliance displays: “START TIME… 00:00”.
(If you hold the CHANGE button (C4) down, the time is
changed rapidly).
the message: “AUTO-START NO”.
Press the CHANGE button (C4) to modify the function (the
machine displays “AUTO-START YES”).
NOTE: when the machine is o and an auto-start time has been
set, the symbol appears alongside the time on the unlit
display.
NEXT (C3) to change other parameters.
Descaling
Important! Before descaling, make sure the water
softener lter has been removed.
Important! Descaler contains acids which may irri-
tate the skin and eyes. It is vital to respect the manufacturer’s
safety warnings given on the descaler pack and the warnings
relating to the procedure to follow in the event of contact with
the skin and eyes.
N:B:: Use the descaler recommended by the manufac-
turer only. Use of other descalers invalidates the guarantee.
Failure to descale the appliance as described also invalidates the
guarantee.
Over time, constant heating up of the water used to make the
coee leads to limescale building up in the inner circuits of the
appliance.
When “DESCALE” is displayed, the machine requires descaling.
Proceed as follows:
comes on) then press the NEXT (C3) button repeatedly until
the appliance displays “DESCALE NO”;
“DESCALE YES”
bottle into the tank respecting the instructions given on
the descaler pack, then add water.
When descaling subsequently, use descaler of the same
type and brand as supplied (available from the manufac-
turer’s authorised Customer Services) or a descaler recom-
mended by Customer Services. Always follow the instruc-
tions on the pack.
-
der the hot water spout (g. 3);
-
ter spout into the container below.
“APPLIANCE IN DESCALE” is displayed;
deliveries and pauses to remove limescale deposits from
inside the machine.
FILL TANK”.
The appliance must now be rinsed through to eliminate residues
of descaling solution from inside the appliance. Proceed as fol-
lows:
spout;
into the container below and the appliance displays “RINS-
ING”;
message “RINSING COMPLETE... PRESS OK”;
Loading ...
Loading ...
Loading ...