Loading ...
Loading ...
Loading ...
Cleaning and maintenance
30
4.8 Extraordinary maintenance
Replacing the interior light bulb
1. Completely remove all accessories from
inside the oven.
2. Remove the racks/trays support frames.
3. Remove the bulb cover using a tool (e.g.
a screwdriver).
4. Slide out and remove the lamp.
5. Replace the lamp with one of the same
type (40W).
6. Replace the cover correctly, so that the
moulded part of the glass is facing the
door.
Press the cover completely down so that it
attaches perfectly to the bulb support.
During the first pyrolysis cycle,
unpleasant smells may occur due
to the normal evaporation of oily
manufacturing substances. This is
an absolutely normal phenomenon
which disappears after the first
pyrolysis.
During the pyrolysis cycle the fans
produce a more intense level of
noise due to a greater rotation
speed. This is an absolutely normal
operation, intended to provide
more effective heat dispersal. At
the end of the pyrolysis cycle, the
fans will continue to operate for
long enough to avoid overheating
the walls of adjacent units and the
front of the oven.
If the pyrolysis gives unsatisfactory
results at minimum duration, it is
recommended to set a longer time
for successive cleaning cycles.
Live parts
Danger of electrocution
• Disconnect the oven power supply.
• Use personal protective equipment.
Do not touch the halogen lamp
directly with your fingers, but wrap
it in an insulating material.
Loading ...
Loading ...
Loading ...